Home

Prodotti espositori #SICAM2024

Sistemi elettrificati

DESCRIPTION
Flush built-in socket with two 16 A IP44 sockets for powering household appliances and charging mobile phones and tablets.
Automatic opening of the lid by lightly pressing the center.
Metal cover with silicone seal allowing water seal in the closed position.
Also available with 1 socket 16 A socket + 1 USB A or 1 USB A/C for charging mobile phones and tablets.
Material: metal.
Max power: 3 680 W.

INSTALLATION
Installation on worktop from 5 to 40 mm thickness.
Drill hole: Ø 135x60 mm (template included)
Fixing by screwing.
Power supply: 230 V / 16 A.
Power cable 3 x 1.5 mm² 1 m long with euro plug.

GOOD TO KNOW
Space-saving thanks to only 45.7 mm in height, this socket can also be mounted above drawers.

Sistemi elettrificati

DESCRIPTION
15W induction charger to be built-in either above the worktop with integration of a decorative tempered glass plate, or under, the product is then invisible (matte black metal body).
The system is ensured by a removable ring equipped with springs allowing the assembly to be fixed on the work surface.
The driver is integrated into the module and can be deported plugged with a USB C cable, not included (see drawing below).

INSTALLATION
To be installed in all type of worktop with a minimum thickness of 10 mm (except in metal).
In case in invisible installation (à compléter).
Drilling: Ø 80mm.
Power cable: 2.5 m with euro plug.

GOOD TO KNOW
2 possible installations: visible or invisible.
The driver can be deported and wired to the charger with a USB cable (not supplied) which will reduce the space taken up under the work surface.

Sistemi elettrificati

DESCRIPTION
Compact and discreet USB A + C socket block to be recessed into a panel (worktop, furniture, etc.).
Decorative metal face available in matte black or brushed stainless steel.
Driver included to be fixed by double-sided.
1.5 meter female to male 230 V power cable.
USB-C to USB-C cable supplied.

INSTALLATION
Caution: to be used on a worktop with a minimum thickness of 10 mm.
Drilling hole: Ø 38mm Invisible fixing from the front.
The driver can be fixed under the worktop by double-sided (for example).

GOOD TO KNOW
USB power:
USB-A: 15W max
USB-C: 20W max
USB-A + USB-C: 15W max

Sistemi elettrificati

DESCRIPTION
Pop-Up socket with 3 sockets 16 A + 2 USB A or 3 sockets 16 A + USB A/C to power household appliances and charge mobile phones and tablets.
With 2 opening levels via a special locking brake + soft closing to cushion the closure.
Body in aluminum or in black aluminum.
Lid and decorative ring in steel.
With guides on the 2 sides and 1 rear to avoid scratches from prolonged use.
Max Power: 3 680 W 2 sockets - 2 900 W for UK).

INSTALLATION
Mounting on panel of 50 mm max.
Installation in a Ø 80mm hole.
Fixing by ring nut under the worktop.
Power supply: 16 A / 230 V.
Power cable 3 x 1.5 mm² 2 m long with europlug or UK plug.

GOOD TO KNOW
Same design as Ring range.

Sistemi elettrificati

DESCRIPTION
With 1 socket 16 A + 1 USB A or 1 socket 16 A + 1 USB C (18 W max) to power household appliances and charge mobile phones and tablets.
Lid with open and close assistance that can be installed horizontally or vertically.
Material: metal.
Max power 3 680 W.

INSTALLATION
Installation on worktop from 5 to 45 mm thickness.
Drill hole: Ø 70 mm.
Fixing by screwing.
Power supply: 230 V / 16 A.
Power cable 3 x 1.5 mm² 1 m long (2 m long for german references).
Accessorize: PLUG-2205 to order separately for german references.

GOOD TO KNOW
The cover stays open both in vertical and horizontal mounting.