Prodotti espositori #SICAM2024

BIO BASED OIL PRO0018TR
B.P.S. Srl
Prodotti per il trattamento del legno
BIO-NATURAL SELF-SEALER FINISHING WAXY OIL
Mix of completely natural solvents free oils and waxes.
It was created for all kinds of interior wooden surfaces.
Technical recommendations: Wood sawdust, cotton cloths,
paper and similar products soaked in liquid product can cause self-combustion phenomena.
Therefore, be careful to wet them with water before disposal.

Main characteristics of the product:
- Sheen level: 60 Gloss
- Brush, Roller, Buffing machine
- Viscosity Ford 46±2 sec.
- Solid content: 97%
- Thickness: 40- 60 gr/m2
- Drying Time: 36-48 h
- Overcoatable: 12 h
Apri
BIO FAST OIL UV PRO3939TR
B.P.S. Srl
Prodotti per il trattamento del legno
RENEWABLE BASED UV OIL 100% VOC FREE NATURAL SILKY EFFECT
Special blend of natural oils, waxes, resins and additives.
It dries and hardens in seconds when subjected to UV light (wavelength 280/400 nm).
Excellent hardness, chemical and mechanical resistance. 100 % VOC free.

Main characteristics of the product:
- Hardens in few sec.
- Excellent hardness
- Excellent chemical resistance, EN 13442
- Excellent mechanical resistance
- 100% VOC free
- From renewable resource

- Sheen level: 30, 60 Gloss
- Brush, Roller, Cloth, Buffing machine
- Viscosity Ford 4: 60 sec.
- Solid content: 100%
- Thickness: 8 - 25 gr/m2
- Overcoatable: 3 sec.
Apri
HARDWAX HS OIL PRO8215TR
B.P.S. Srl
Prodotti per il trattamento del legno
NATURAL REBUFFABLE VOC FREE HIGH SOLID WAX-OIL
It is a wax dispersion in natural oils for the treatment of wooden surfaces.
Created for parquet and all other interior wooden surfaces.
Technical recommendations: Sand the surface between two coats with 220/240 grit paper.
After 8-12 hours polish the surface for soft and smooth satin sheen.

Main characteristics of the product:
- Sheen level: 60 Gloss
- Brush, Roller, Cloth
- Viscosity Ford 46±2 sec.
- Solid content: 100%
- Thickness: 40-50 gr/m2
- Drying Time: 12-24 h
- Overcoatable: 6-8 h
Apri
HARDWAX HYBRIDOIL PRO4046NE
B.P.S. Srl
Prodotti per il trattamento del legno
INTERIOR HS FINGERPRINT-RESISTANT FAST SPRAYABLE DEEP MATT OIL
DEEP BLACK Sheen level: 05 gloss
Deep matt, black hogh solid oil formulated to create modern finish on wooden furniture.
Stain, fingerprint, abrasion resistant. Water-repellent.
Resistant to common beverages.
Very easy to apply.

Main characteristics of the product:
- Easy to apply
- Suitable for hard and soft woods
- Anti-stain, water-repellent, resistant to abrasion
- Resistant to wine, beer, coke, coffee, tea, fruit juice, milk and water according to the German standard DIN 68861-1

- Sheen levela: 05 Gloss
- Brush, Roller, Gravity gun, nozzle 1,4-1,7 mm/
Pressure: 3 bar.
- Cert. EN71-III
- Viscosity Ford 4: 26"
- Solid content: 52%
- Thickness: 30-40 gr/m2
- Overcoatable: 8-12 h
- Drying Time: 12-24 h
Apri
PROAQUA BASE COAT SEALER PRO8523TR
B.P.S. Srl
Prodotti per il trattamento del legno
INTERIOR 1-2K HIGH BUILD WATERBORNE BASE COAT SEALER FOR FURNITURE
CLEAR
Clear basecoat for high-quality interior furniture. Suitable for artisanal and industrial cycles, for open and closed pore effect.
Very flexible, non-yellowing and very transparent, easily sandable. Particulary recommended for oak, walnut, mahogany, ash, fraké, ramin etc.
Ready-to-use, but can be catalized. Suggested top coat: VM8524TR.

Main characteristics of the product:
- Good built
- Fast drying
- Good floating
- Top flexibility
- Non-yellowing
- High transparency

- Brush, Roller, Spray gun (nozzle 1,4-1,8 mm, pressure 4 bar)
- Viscosity Ford 4: 180"
- Solid content: 31%
- Thickness: 120-160 gr/m2
- Sandable: 4 h
- Overcoatable: the next day

Range of use:
Particularly indicated as a base coat for high quality wooden panels and items in all kinds of wood.
Apri
PROAQUA HYBRIDOIL PRO3013TR
B.P.S. Srl
Prodotti per il trattamento del legno
INTERIOR NATURAL EFFECT INVISIBLE 1-2K WATERBORNE
SELF-SEALING HYBRID OIL FOR SPRAY AND ROLLER
CLEAR
Water-based, non-film-forming, water-repellent protective hybrid oil with an invisible effect for all kinds of wooden surfaces.
Suitable for artisanal and industrial cycles.
Effectively protects against stains caused by water and other liquids, even if applied in only one coat.
Easy to apply, good resistance, fast drying, resistance to yellowing.
Ready-to-use, but can be catalized.

Main characteristics of the product:
Caratteristiche principali del prodotto \ Main characteristics of the product:
- Very easy to apply
- High penetration
- Fast drying
- One coat
- Good resistance to yellowing
- Good resistance
- Not film-forming

- Sheen level: 00-05 Gloss
- Brush, Roller, Cloth, Spray gun (nozzle 1,4-1,8 mm, pressure 4 bar)
- Viscosity Ford 4: 35 sec.
- Solid content: 21%
- Thickness: 80 gr/m2
- Dust free: 20"
- Sandable: 4h
- Complete drying: 12-24h

Range of use:
Suggested for treatment of all types of interior and exterior wooden articles.

Way of use:
spray gun
Rag
Brush
Roller

Application characteristics (20 °C):
Yeald, each layer (gr./m²): 12 - 16 m²/Lt depending on wood species
Suggested n.of coats: 2
To be used with hardener: CAH8502.XX
Hardener to base ratio: 10%
Apri
PROAQUA INVISIBLE TOUCH PRO4130XX
B.P.S. Srl
Prodotti per il trattamento del legno
INTERIOR ZERO GLOSS 1-2K WATERBORNE SELF-SEALER

Ecological self-sealing lacquer for interiors.
Creates a 0-gloss natural effect comparable to raw wood. For this effect apply as a self-sealer in two coats with an intermediate sanding using 320 grit paper.
Due to waxes creates a very soft surface, that is pleasant to touch.
Scratch resistant, fast drying, resistant to yellowing, very transparent.
Ready-to-use, but can be catalized.

clear/ white

Main characteristics of the product:
- Untreated wood effect
- Scratch resistance
- Fast drying
- Good floating
- Resistance to yellowing
- High transparency

- Sheen level: 00-05 Gloss
- Brush, Roller, Spray gun (nozzle clear 1,4-1,8 mm, white 1,6-2,0 mm, pressure 4 bar)
- Viscosity Ford 4: 34 sec.
- Solid content: 30%
- Thickness: 80-120 gr/m2
- Sandable: 6 h
- Dust free: 30"
- Overcoatable: 6 h
- Complete drying: 18 h

Range of use:
Spray
Roller
Brush
Apri
PROAQUA LASUR PRO3702XX
B.P.S. Srl
Prodotti per il trattamento del legno
EXTERIOR DEEP-WETTING WATERBORNE CARPENTRY IMPREGNANT
Low viscosity, deep wetting, non film-forming semi-transparent stain. Recommended for artisanal and industrial cycles.
Iron oxides and UV filters protect wood lignin from decomposition. Special additives protect wood from molds and insects. Suitable for impregnating machines.
One coat is sufficient for interior application.

Main characteristics of the product:
- Great penetration
- Low viscosity
- Ready to use
- Light resistant colours
- Prevents the formation of chromophoric molds and the attack of lignivorous insects

- Brush, Roller, Flow Coating, Immersion
- Viscosity Ford 4: 15 sec.
- Solid content: 14%;
- Thickness: 80-120 gr/m2
- Overcoatable: 4-6 h
Apri
PROAQUA PRIMER BASE COAT PRO8526BI
B.P.S. Srl
Prodotti per il trattamento del legno
INTERIOR 1-2K HIGH BUILD WATERBORNE BASE COAT FOR FURNITURE WHITE
White basecoat for high-quality interior furniture. Suitable for artisanal and industrial cycles, for closed pore effect. Very flexible, non-yellowing and easily sandable.
Particulary indicated for MDF, walnut, fraké, ramin, tanganika, ayous etc. Ready-touse, but can be catalized. Suggested top coat: VM8524BI

Main characteristics of the product:
- Spray gun (nozzle 1,8-2,2 mm, pressure 4 bar)
- Viscosity Ford 8: 40"
- Solid content: 56%
- Thickness: 50-250 gr/m2
- Sandable: 6-8 h
- Overcoatable: the next day/
Apri
PROAQUA TOP COAT PRO8524XX
B.P.S. Srl
Prodotti per il trattamento del legno
INTERIOR WATERBORNE ACRYLIC TOP COAT FOR FURNITURE
CLEAR (TR)/WHITE (BI) Sheen level: 10-20, 30-40, 50-60, 80-90 gloss
Top coat for high-quality interior furniture and doors. Suitable for artisanal and industrial cycles, for open and closed pore effects.
Good surface resistance, good verticality, soft to the touch, resistance to yellowing, quick drying. Particulary recommended for oak, walnut, mahogany, ash, fraké, ramin etc.
Ready-to-use, but can be catalized. Suggested base coats: VM8523TR or VM8526BI.

Main characteristics of the product:
- Resistant to yellowing
- Low viscosity
- Ready to use
- Very easy to apply.
- Good vertical hold
- High softness to the touch
- Re-coatable

- Sheen level: 00-05, 10-20, 30-40, 50-60, 80-90 Gloss
- Brush, Roller, Spray gun (nozzle clear 1,4-1,8 mm, white 1,6-2,0 mm mm, pressure 4 bar)
- Viscosity Ford 4: 130-140″ clear., 180-220″ white
- Solid content: 31-42%
- Thickness: 100-120 gr/m2
- Dust free: 20"
- Complete drying: 24h

Range of use:
It is a general use product for the treatment of furniture and accessories, of horizontal as well as vertical surfaces, of assembled ones, as well as disassembled. To be used exclusively with a proper base coat.

Way of use:
spray gun
brush
Roller

Substrate preparation
Prepare the substrate through applying the HF8523 base coat.

Tips & tricks
To further improve performance, add CAH8506.XX, hardener for water-based lacquers in a proportion of 10: 1, mix well.
Apri